Motorized Louvered Aluminum Rooftop Pergola

Often, yes. Depending on wind loads, available ballast, structural slab capacity, and local regulations, we can develop an independent load-spreading or ballast-supported base. The final solution must be reviewed by the project structural and roofing consultants.

System weight varies by series, span, accessories, and reinforcement. Aluminum framing is considerably lighter than typical steel or masonry alternatives. We provide estimated dead loads during proposal and confirmed loads with approved shop drawings.

Wind resistance is project-specific rather than a single universal number. Building height, terrain category, corner pressure, bay size, louver position, anchoring, and local code all matter. We engineer the selected series against the declared design load.

Closed louvers interlock and direct rain into integrated perimeter gutters and internal downpipes. The system is designed for weather protection, but it is an outdoor structure rather than a conditioned, permanently sealed building envelope.

Optional rain and wind sensors can trigger preset actions. Louvers may close for rain and move to a safer programmed position during high wind. Final automation logic is coordinated with the project's operating plan.

Yes. Concealed column outlets can be coordinated with roof drains or a dedicated rainwater route. We provide outlet locations and flow information for the project MEP or plumbing consultant.

That depends on the roof manufacturer and attachment strategy. We can supply non-penetrating concepts and interface details, but the roofing consultant or warranty provider should approve all contact, flashing, and protection layers before installation.

Yes. Custom bay sizes, offsets, partial infills, screen positions, and column locations allow the layout to work around services and maintenance clearances. A dimensioned roof plan is needed for engineering.

Maximum bay size depends on the product series, wind and snow loads, louver direction, and accessory weight. Typical commercial modules range from approximately 4 × 6 m to 4 × 8 m, with multi-bay combinations for larger areas.

Yes. Modules can share beams or stand independently and can be arranged in rows, grids, or stepped layouts. Integrated gutters manage water at module junctions.

Yes. Wind-resistant zip screens, privacy screens, glass sliding panels, and other enclosure options can be integrated where local regulations and structural design permit.

Standard architectural powder-coat colors are available, along with project-specific RAL matching, wood-effect finishes, and dual-color options subject to minimum order quantity.

Dimmable LED strips are designed into the frame. Infrared heaters, fans, speakers, and selected third-party accessories can be coordinated after confirming electrical load, mounting points, and clearance.

Options include handheld remote, wall switch, mobile app, rain and wind sensors, and dry-contact or protocol-based integration with compatible building-management systems.

Standard commercial projects commonly require 25–45 working days after drawing approval and deposit. Custom finishes, testing, unusually large orders, or peak-season capacity may extend the schedule.

Yes, with the right specification. We recommend enhanced surface preparation, suitable powder-coat class, corrosion-resistant fasteners, protected electronics, and a planned freshwater cleaning schedule.

Routine work includes clearing gutters, checking drainage outlets, cleaning louvers, inspecting fasteners and seals, and testing motors and sensors. We provide a maintenance schedule for the selected configuration.

Our standard structural aluminum and powder-coat warranty can extend to five years under stated conditions. Motors, electronics, screens, and coastal applications may have separate terms. Project-specific warranty details are issued with the quotation.

Yes. We provide labeled components, manuals, installation drawings, packing lists, video guidance, and remote technical support. On-site supervision can be quoted for eligible projects and destinations.

Please send the roof plan, project location, building height, target coverage, site photos, preferred accessories, finish, expected quantity, and any known wind or snow design criteria. We will identify missing engineering inputs before final pricing.